STIHL TS440

TS440 CUT-OFF MACHINE

HIGH PERFORMANCE FOR DEMANDING APPLICATIONS

With the STIHL TS 440 gas cut-off machine, you are ideally equipped for professional applications in the areas of construction and civil engineering. Whether you need to cut concrete, stone, asphalt, structural steel or pipes, the STIHL TS 440 cut-off machine, equipped with a 350 mm cutting wheel such as the STIHL D-SB 80 diamond cutting wheel, will complete all of these tasks reliably. Thanks to the extended guard adjustment, the tool can be used efficiently in tight spaces when cutting pipes, corners and walls. If there is a strong kickback, the STIHL QuickStop cutting wheel brake stops the cutting wheel in a fraction of a second.

The high-performance STIHL 2-MIX engine, combined with the two-level belt drive, ensures high engine power when carrying out demanding cutting applications. The optional retrofittable STIHL ElastoStart function and decompression valve reduce the amount of force required to start the machine, so that you can work comfortably with the STIHL TS 440. Meanwhile, the ergonomic handle design and, in particular, the STIHL anti-vibration system protects your muscles and joints while you work.

The electronic water control automatically ensures optimal cooling of the cutting wheel and dust binding. Low-maintenance and practical: thanks to the long-life air filter system, you can benefit from a long filter service life.

FEATURES

LONG-LIFE AIR FILTER SYSTEM FOR CUT-OFF MACHINES

ENSURES A LONG FILTER SERVICE LIFE. The long-life air filter system for cut-off machines does not collect coarse dust particles, but uses cyclone air routing to separate them and then discharges them into the ambient air. With just this first step the system removes around 80% of dust particles in the intake air. This enables an extremely long filter service life, and makes the tool easy to maintain.

STIHL 2-MIX ENGINE

HIGHLY POWER-EFFICIENT With the STIHL 2- MIX engine, you can reduce exhaust emissions and fuel consumption., and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

STIHL ANTI-VIBRATION SYSTEM

FOR MORE PLEASANT WORK. Vibrations can occur When you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

MANUAL DECOMPRESSION

EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice. The version(s) available in each country may differ from the given range and specifications.