NEW HOLLAND C314
NEW HOLLAND — C314 — MINI TRACK LOADER
TAKE A BREAK FROM BACK-BREAKING WORK
Ditch the shovel, wheelbarrow and all the hard manual labor that goes with them — New Holland’s mini track loader is all the equipment you need. The C314’s impressive rated operating capacity and weight help check more jobs off your residential construction or landscaping to-do list. Plus, its narrow frame means there’s no sacrificing top-grade performance in small spaces.
FEATURES
LIFT WITH EASE
Grading, digging, moving material, digging fence posts, and just about any other landscape task you can think of just got easier. The C314 and all 3,536 lbs (1604 kg) of operating weight on narrow track and 3,783 lbs (1716 kg) on wide track have your back on the jobsite. The radial lift geometry means a simple linkage system with a single pivot point to provide greater forward reach at mid-range heights.
SMALL BUT MIGHTY
Take a break from back-breaking work to discover how power and versatility are a formidable combination in the C314. This machine may have mini in its name – a 56.5 in (1435 mm) machine height and 85.6 in (2175 mm) machine length – but believe it is mighty, providing 2,833 lbs (1285 kg) of rated operating capacity on the narrow track. Plus, a direct drive hydraulic motor offers maneuverability and control to complete the most precise jobs in tight areas.
CONSIDER WIDE TRACK
The wide track width on the C314 measures 40.4 in (1026 mm) to maximize your versatility in developing job sites and moving landscaping materials. With 3,148 lbs (1428 kg) of rated operating capacity on the wide track and 1,574 lbs (714 kg) at 50% of tipping load, you can count on the C314 to possess the strength required for the operation.
POWER AND VERSATILITY
The C314’s interface and 14-pin electric multifunction control offers greater versatility with new and older attachments ranging from augers, trenchers, grapple buckets, rakes, and beyond. The 24.8 HP (18.5 kW) engine provides quiet and smooth operation and the Tier 4 Final solution means no required DEF (Diesel Exhaust Fluid) or a DPF (Diesel Particulate Filter). Operators can maximize the total cost of ownership with less maintenance and maximum uptime without the need for a parked regeneration.
EFFICIENT OPERATION
Operators can take advantage of a cushioned platform, grab handles, hand throttle key start, cup holder and cell phone pocket. Use the hydraulic pilot joystick control to tackle jobs and maneuver narrow environments.
STANDARD EQUIPMENT
OPERATOR ENVIRONMENT
• Hydraulic pilot joystick control
• Loader and ground drive control lockout
• Cushioned operator platform
• Operator grab handles
• Key start
• Hand throttle
• Cup holder
• Pocket for cellular phone.
• Operator presence sensor
ENGINE
• Engine tip-over shut-off
• Glow plug starting aid
• Locking fuel cap
• Fuel filter with water separator
• Electric fuel pump
DRIVETRAIN
• Dual hydrostatic drive motors
• SAHR parking brake
• 5 roller undercarriage
• Narrow rubber track belt
HYDRAULICS
• 3-spool loader control valve
• 1x dual acting auxiliary hydraulics
• Proportional auxiliary hydraulic control on joystick with detent
• Loader arm float
LOADER
• Radial lift geometry
• CII mech attachment coupler
• Loader lift arm support strut
• 2x additional counterweight
ELECTRICAL
• 12V power plug socket
• Front and rear LED work lights
• Master battery disconnect
OTHER STANDARD FEATURES
• Lock-able hood compartment
• Horn
WARRANTY
• Base warranty coverage: 2-Year/2,000-hour full machine limited warranty
OPTIONAL EQUIPMENT
DRIVETRAIN
• Wide rubber track belt
HYDRAULICS
• Case drain attachment connection
• Bio-hydraulic oil and lubricants
ELECTRICAL
• 14-pin electrical auxiliary connection
LOADER
• 36 in dirt bucket
• 42 in dirt bucket
• Bolt on bucket teeth
• Bolt on bucket cutting edge
• 6x additional counterweights
TELEMATICS
• FleetForce™ Telematics – includes hardware and a 5-year advanced subscription
OTHER
• English, Spanish, or French Operator Manual
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are subject to change without prior notice.
Engine
| Engine speeds | Rated – full load | RPM | 2600 |
|---|---|
| Emissions Certification | Stage V |
| Gross | 24.8 hp (18.5 kW) |
| Fuel | Diesel |
| Cylinders | 3 |
| Peak torque @ 1700 RPM | 59.1 lb·ft (80.1 N·m |
| Horsepower @ 2600 RPM – SAE J1349: | 24.8 (18.5) @ 2600 rpm |
| Net | 24 hp (18.0 kW) |
| Model | Kubota D1305-E4B |
| Displacement | 77.0 in3 (1.261 L) |
Drivetrain
| Parking brake: Type | SAHR pin brake |
|---|---|
| Max. travel speed | 4.7 mph (7.5 kph) |
| Transmission type | Hydrostatic |
Loader Performance Specs
| Fuel Tank | 7.9 gal (30 L) |
|---|---|
| Wide Track Tipping load* | 3,148 lb (1 428 kg) |
| Engine Coolant | 0.9 gal (3.5 L) |
| 50% of tipping load | 1,416 lb (643 kg |
| Narrow Track Tipping load* | 282,833 lb (1 285 kg)33 (1285) |
| 35% of tipping load | 992 lb (450 kg) |
| Hydraulic system | 4.5 gal (17 L) |
| Lift Geometry | Radial Lift |
| Narrow Track Rated operating capacity – ROC*: | |
| Note | Measured using standard equip bucket. |
| Wide Track Rated operating capacity – ROC*: | |
| Engine oil w/ filter | 6.0 qt (5.7 L) |
Hydraulics
| Implement Hydraulics Operating Pressure: | 2,800 psi (190 bar) |
|---|---|
| Displacement | 1.2 in3 (19 cm3 |
| Loader control valve: Type | Open center |
| Standard flow @ rated engine RPM: @ 100% efficiency | 13.2 gpm (50 L/min) |
| Implement pump type | Fixed Gear |
Dimensions
| Bucket Width: | |
|---|---|
| Overall Height | 56.5 in (1 435 mm) |
| Wide Track | 40.4 in (1 026 mm) |
| Machine Width: | |
| Narrow Track | 35.0 in (890 mm) |
| Overall length without bucket | 85.6 in (2 175 mm) |
Operating Weight
| Wide Track (WT) | 6X Counterweight (OPT): 3,783 lb (1 716 kg) |
|---|---|
| Narrow Track (NT) | 2X Counterweights (STD): 3,536 lb (1 604 kg) |
Electrical
| Battery | 62 AHR 540 cold-cranking amps @ 0° F (-18° C°) |
|---|---|
| Alternator | 60 amp |
| System Voltage | 12 Volts |
