MY720

VENTRAC
MY720

Turf Maintenance Attachments
Find Out More
Request Quote

Description

VENTRAC – MY720 – FLAIL MOWER

The new Ventrac Fine Cut and Fast Cut Flail Mowers are in a class of their own. With the out-front mounted design unique to Ventrac, these mower decks offer the ability to turn tall or dense areas into a quality finish cut for fast and efficient property management. Flail mowers are a perfect choice for any overgrown area with a variety of different types of vegetation. Add Ventrac’s capabilities to mow difficult areas such as slopes, wet areas, or retention basins, and these mowers will step up your game when it comes to maintaining any property.

The Fast Cut Flail features Y knives, and it is for a dense or brush- type material application. The Fast Cut is a good choice for areas of overgrown brush and vines that do not require regular mowing, but you still want a better finish result than a typical rotary rough-cut mower.

A flail mower cuts by using knives attached to a balanced rotor. The rotor runs parallel with the ground, and the hanging knives spin vertically to cut the grass. This system can produce a high volume cutting process as it grabs the grass while holding it under the mower for a longer time, allowing it to shred into fine cuttings that are then dispersed evenly along the width of the mower. Evenly dispersed clippings allow for less windrowing and clumping of grass that can kill turf. Flail mowers also provide a much more pleasing aesthetic result than alternative types of rough-cut mowers.

The swinging knives typically handle impact from debris better than fixed rotary blades, and replacing a knife is easier and less expensive than replacing a rotary cutting blade. A huge benefit of the Ventrac Flail mowers is the cut height adjustment mechanism, which allows the user to adjust cut height faster, easier, and with more precision. The process of changing the height-of-cut on a Ventrac flail mower does not require tools and can be accomplished in under a minute

Specifications are subject to change without prior notice. Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications

  • DIMENSIONS - Width: 79 in (201 cm)
  • DIMENSIONS - Cutting Width: 72 in (183 cm)
  • FEATURES - Flip Up : Yes
  • TECHNICAL SPECIFICATIONS - Full Description: MY, MY720 72" Flail Mower - Fast Cut
  • DIMENSIONS - Height: 27 3⁄4 in (70 cm)
  • FRAME DESIGN - Height of Cut Adjustment : 1-5 in
  • CUTTING SYSTEM - Rotor Direction-of-Operation: Forward
  • FEATURES - Max. Cutting Size : 1⁄2 in
  • FEATURES - Height Adjustment: 2 levers | no tools required
  • FRAME DESIGN - Oscillation Amount : 9.3 in (Over rear roller width)
  • CUTTING SYSTEM - Rotor Speed (at 3600 Tractor RPM): 3000 RPM
  • CUTTING SYSTEM - Rotor Diameter: 12 3⁄4 in (32 cm)
  • CUTTING SYSTEM - Blade Count: 72
  • TECHNICAL SPECIFICATIONS - Product Type: Attachment
  • DIMENSIONS - Length: 63 1⁄2 in (161 cm)
  • CUTTING SYSTEM - Blade Type: "Y"

Images