MR740

VENTRAC
MR740

Turf Maintenance Attachments
Find Out More
Request Quote

Description

VENTRAC – MR740 – TRIPLEX REEL MOWER

The Ventrac MR740 Triplex Reel Mower is designed to be the ultimate trim and surround mower. With a 74″ width of cut, variable speed hydraulics, standard back lapping valves, and offset capability, the Ventrac MR740 includes many features to ensure superior, low-maintenance powered by the all-wheel performance. When powered by the all-wheel drive Ventrac 4500 tractor with dual wheels, the MR740 can be operated on hills and slopes up to 30 degrees — allowing you to go where no other reel mower can go. You will be amazed at the time and labor you’ll save, and the beauty you’ll leave behind.

REQUIRED: Spool float kit (23.0111-7) required on 4000 series tractor to operate MR740.

STANDARD FEATURES

• Fully serviceable and easy to maintain

• Superior edge retention and life for the bed-knife and reel

• Low pressure, low temperature Hydraulic Reel Drive for long-lasting service

• Identical reel heads are simple and easy to change

• Transport locks keep reel heads in raised position for transportation and storage

• Bypass valves enable/disable each motor individually

• Simple and quick reel speed adjustment

• Fully adjustable grass discharge deflectors

• Ventrac Mount System

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications

  • REEL SPECIFICATIONS - Reel Length: 26 inches | 66 cm
  • DIMENSIONS - Length: 48 inches | 122 cm
  • DIMENSIONS - Height: 22 inches | 56 cm
  • TECHNICAL SPECIFICATIONS - Cutting Height Range : .39 inch to 2.36 inches | 10 mm to 60 mm
  • TECHNICAL SPECIFICATIONS - Discharge Type: Fully adjustable
  • REEL SPECIFICATIONS - Adjustment : Reel to Bed knife
  • REEL SPECIFICATIONS - Reel Diameter: 7 inches | 18 cm
  • REEL SPECIFICATIONS - Reel Speed: Variable
  • REEL SPECIFICATIONS - Reel Blades: 7
  • DIMENSIONS - Weight: 613 lbs | 278 kg
  • REEL SPECIFICATIONS - Reel Drive: Hydraulic
  • TECHNICAL SPECIFICATIONS - Stock Code: 39.55130
  • TECHNICAL SPECIFICATIONS - Cutting Height Adjustment: Multi-Point
  • TECHNICAL SPECIFICATIONS - Width of Cut : 74 inches | 188 cm
  • TECHNICAL SPECIFICATIONS - Cutting Positions: Infinite
  • TECHNICAL SPECIFICATIONS - Deck Suspension : Front Roller (grooved) | Rear Roller (smooth)
  • REEL SPECIFICATIONS - Cutting Units: 3
  • DIMENSIONS - Shipping Dimensions (LWH): 55 x 48 x 45 inches | 140 x 122 x 114 cm
  • REEL SPECIFICATIONS - Back-lapping: Standard with Individual Bypass Valves
  • DIMENSIONS - Width: 84 inches | 214 cm
  • TECHNICAL SPECIFICATIONS - Deck Type: Front Mount | Triplex Reels
  • TECHNICAL SPECIFICATIONS - Required Kit, Spool float: 23.0111-7

Images