TS420

STIHL
TS420

Cut-Off Machines
Find Out More
Request Quote

Description

TS420 CUT-OFF MACHINE

POWERFUL CUT-OFF MACHINE WITH 14″ CUTTING WHEEL

Thanks to its compact dimensions, road construction and landscaping professionals can use the STIHL TS 420 gas-driven cut-off machine to carry out particularly tough cutting tasks very reliably. Its powerful 350 mm cutting wheel allows for cutting depths of up to 125 mm in concrete, stone, asphalt, mild steel or through iron pipes. The STIHL anti-vibration system in the STIHL TS 420 ensures that you can guide the motorised cut-off machine precisely even during longer periods of use, protecting your muscles and joints. The ergonomic handle design also helps with this. To ensure you can start the economical STIHL 2-MIX engine with ease, the power tool also features a decompression valve that reduces the effort required to pull the starter cord.

The water connection continuously supplies water to the cutting wheel of the STIHL TS 420 motorised cut-off machine. Water binds the dust and cools the cutting wheel, while the long-life air filter system and the compensator extend the cleaning interval and ensure you can work for longer periods without interruption. The separation of clean air and mixture in the engine boosts the performance while also reducing consumption.

FEATURES

STIHL 2-MIX ENGINE

HIGHLY POWER-EFFICIENT With the STIHL 2- MIX engine, you can reduce exhaust emissions and fuel consumption., and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

LONG-LIFE AIR FILTER SYSTEM FOR CUT-OFF MACHINES

ENSURES A LONG FILTER SERVICE LIFE. The long-life air filter system for cut-off machines does not collect coarse dust particles, but uses cyclone air routing to separate them and then discharges them into the ambient air. With just this first step the system removes around 80% of dust particles in the intake air. This enables an extremely long filter service life, and makes the tool easy to maintain.

STIHL ANTI-VIBRATION SYSTEM

FOR MORE PLEASANT WORK. Vibrations can occur When you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

SEMI AUTOMATIC V-BELT TENSIONING

EXTENDS THE BELT’S SERVICE LIFE. Semi. automatic STIHL belt tensioning makes it easier for you to re-tension the drive belt. All you need is to adjust the adjustment screw with your spark plug wrench. Consistent tension extends the service life of the belt and bearing. For more detailed information on re-tensioning, please refer to the operating instructions of your power tool.

MANUAL DECOMPRESSION

EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.

COMPENSATOR

REDUCED MAINTENANCE. The compensator is a control system in the carburetor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice. The version(s) available in each country may differ from the given range and specifications.

Specifications

  • TECHNICAL DATA - Cutting disk diameter: 350 mm
  • TECHNICAL DATA - Work basic equipment: Kunstharz Stein
  • TECHNICAL DATA - Weight: 9.7 kg | 21.4 lbs
  • TECHNICAL DATA - Max. cutting depth: 125 mm
  • TECHNICAL DATA - Power output: 3.2 kW | 4.4 bhp
  • TECHNICAL DATA - Overall length: 72 cm
  • TECHNICAL DATA - Engine power: 4.3 bhp
  • TECHNICAL DATA - Displacement: 66.7 cc | 4.07 cu-in

Images